3/8" 37 Degree JIC Adapter for TRS21 Recovery Pump - Pair 1.5inch Compressor Seals will require re-build

Compressor Seals will require re-build after 200-240hrs of operation

Unique Catch Port Design: An additional length of hose can be installed at the port inside the tank to facilitate accurate collection of resin

Specification Chamber Material 3004 Aluminum Gasket Material Silicone Lid Material Acrylic Internal Dimensions (ID) 8-5/8" Tall x 7-1/8" Diameter

User assumes all responsibility and risks of the system"

3 cm Refrigerant R404A Environmental Compliance RoHS

3/8" 37 Degree JIC Adapter for TRS21 Recovery Pump - Pair 1.5inch Compressor Seals will require re-buildIncludes a Pair of Custom 3 8" 37 degree JIC fittings that adapt on to any TRS21 pump. (Does not include Pump) ***Note: This Adapter SHOULD NOT BE OVERTIGHTENED. Hand Tight with 1 4 Wrench turn will complete the face seal of the O ring. (PTFE Thread Tape is NOT Required for this connection) ***Note: Always use 2 Wrenches while tightening the hose to the flare to stop the gasket from being crushed.