
If you have been a Jacksonville resident long enough, you know exterior paint doesn’t last long here. You may have painted a few months ago, and it’s already showing signs of wear. Now, if you drive toward Riverside or Avondale, you’ll see a home painted years ago, peeling and faded. Three blocks away, a home looks like its paint is still fresh.
No matter what you think, that’s not luck (believe us), but it is a process. It’s understanding exactly how exterior painting works! That can save you energy, time and hundreds of dollars!
Causes for the Jacksonville Exterior Painting Failure
Florida is a beautiful place to live, no doubt. There is sun, water, and greenery, a little heaven. But what can be best for you can turn into your home’s exterior worst enemy. Here are some serious reasons to keep in mind!
Poor Surface Preparation
Most problems start before you even lay the brush on the wall. Paint performs best when it is applied to a clean, sound, properly prepared surface. Likewise, if the surface isn’t clean, dry, and properly profiled, no coating will adhere properly, no matter its chemistry.
Skipping Primer
Primer isn’t optional. It creates the bond between the surface and the topcoat. On bare wood, repaired areas, or stained surfaces, the right primer separates paint that lasts from paint that peels. And “the right primer” matters — not all primers work in all situations.
Using the Wrong Paint
Exterior surfaces in Jacksonville vary, and so do coating needs. Stucco, concrete, wood, vinyl, and metal can’t use the same primer and paint system. For a good, lasting Jacksonville exterior painting job, the painter must know which product to use on each surface.
One thin coat
A thick single coat of paint can change a wall’s color, but it isn’t suitable when you want coverage, consistency, and protection. Generally, a two-coat painting is recommended because it provides richer color, more uniform coverage, and a protective barrier against Florida weather.
Moisture Trapped Behind The Coating
Moisture can enter through roof leaks, damaged stucco, failed sealant, irrigation systems, leaking gutters, or cracks around doors and windows. Applying a new coating does not correct the source of moisture. If water continues entering from behind the surface, it may push the paint away from the substrate.
Correct any known leaks or moisture problems before repainting. Painting over an active problem may hide it temporarily, but the coating can fail again.
UV Exposure
Florida sun is one of the biggest reasons exterior paint fades. Homes with heavy sun exposure can show color fading, loss of sheen, chalking and dullness very fast.
Salt Air
Florida’s picturesque scenery is filled with salt air: microscopic salt particles and moisture from sea spray, marine organic compounds, and ocean waves. People may love that; your home’s exterior doesn’t.
Salt pulls the moisture from the air and holds it against the coating film. This makes surfaces humid, even when the weather is dry.
How to Make It Work?
Several factors can affect your paint and its longevity, but that doesn’t mean it’s impossible. There are steps you can follow for a good exterior:
- Proper cleaning
- Thorough drying
- Scraping and repairing
- Look out for weather
- Choose the right paint
- Better exterior color selection
- Proper coatings
SA Classic Painting to the Rescue!
Being a homeowner in Florida can be peaceful and relaxing at one time, but it can turn into a headache when it comes to the exterior. Of course, the right exterior painter, like SA Classic Painting, can take care of it.
Our team understands how weather, temperature, humidity, and other factors can take the life out of your painting. Plus, we know how to fix it and make it last. With us by your side, you can enjoy the prettiest place while we deal with the enemies of your painting!